|
The Sweepfast System
The Sweepfast
System consists of a 2metre straight Dragbrush,
a 2 metre Cleansweep and a Greensweep and
provides a cost effective in house way of
maintaining sand filled synthetic grass
surfaces. The method of use is as follows:
1)
Brush the surface
with the yellow side of the brush downwards and
the weights on board. This may need doing
several times in different directions to
de-compact the top of the carpet and bring the
sand to the surface.
2)
Remove the
weights, reverse the brush (now white bristles
down) and connect a 2m cleansweep to the brush
using the provided R clip, work the surface in
both directions.
3)
Groom the surface
with the cleansweep on its own, this will put
the sand back into the carpet.
4)
Greensweep the
pitch to collect the debris that has been graded
onto the surface by previous operations, take
care not to overload the greensweep or hit
anything hard as it will break! Travelling at
between 2.5 and 5 mph will generate a static
charge on the Greensweep mat; this charge will
attract broken fibres from the surface.
5)
Empty debris
regularly from the Greensweep, at a collection
point, using the handles at the back.
£1,350.00 + del +
VAT
If possible store both Cleansweep and Greensweep
flat after use
|
The drag
brush has two sockets for weights and a
support wheel at the front. This design
simply lifts the sand infill and pushes
it along which is ideal for
de-compacting the surface and levelling
out the infill.
|
 |
|
Again when used
in combination with a Cleansweep, the
Cleansweep will separate the debris from
the infill layer which has been lifted
out by the brush and then puts the
cleaned infill back into the carpet. |
 |
|
Dragbrush and Greensweep combination
collecting debris |
 |
|
Showing
debris collected |
 |
|
|
|
|
